王进，男，教授、博士生导师，九三学社社员，河北省杰出青年基金获得者（2022年）， 河北省“先进储能技术与装备”工程研究中心副主任，天津市科普作家协会会员，复杂多尺多相热流中心课题组组长。
一、个人简介
1.教育背景：
2008.09-2012.12，西安交通大学，动力工程及工程热物理专业，博士
2006.09-2008.06，东北大学，动力工程及工程热物理专业，硕士
2001.09-2005.06，沈阳化工大学，热能与动力工程专业，学士
2.工作经历：
2023.11至今，，能源与环境工程学院，教授
2024.01-2024.03，芬兰拉彭兰塔理工大学，能源系统系，访问学者
2017.12-2023.10，，能源与环境工程学院，副教授、博导
2021.05-2021.12，捷克布尔诺理工大学，机械工程学院，研究员
2016.09-2017.10，瑞典Lund University（QS Ranking 2016: 70th），能源科学系，国际访问学者
2013.09-2015.12，清华大学（QS Ranking 2015: 25th），动力工程及工程热物理博士后流动站，博士后
2012.12-2017.11，，能源与环境工程学院，讲师
3.研究方向
（1）纳米材料应用：Electronic cooling & direct absorption solar energy based on nanomaterials (新型纳米材料在电子设备冷却和直接吸收太阳能中的应用研究)；
（2）航发相关研究：Combustion, film cooling, and SDBD in gas turbines (燃气轮机燃烧、气膜冷却与等离子体流动控制研究)；
（3）强化传热传质：Heat and mass transfer in PCHEs, PCMs, and thermoelectric materials (印刷电路板式换热器、相变材料及热电材料传热传质技术)；
（4）微流体技术：Bio-ferrofluids and microreactors (生物磁流体与微反应器研究)；
（5）建筑智能控制与地热利用：Energy saving and AI control in agricultural facilities & geothermal utilization (农业设施与地热利用领域节能技术与人工智能控制)；
课题组将为优秀研究生提供硕博连读、出国参会、联合培养、单位推荐及外校求学等机会。欢迎能动、机械、材料、信息和生医专业学生从事基于人工智能控制的复杂系统多相流多尺度传热传质机理及应用研究。
4.人才称号或兼职
序号 |
年度 |
人才称号或兼职 |
1 |
2023年 |
The 26th conference on Process Integration, Modelling and Optimisation for Energy Saving and Pollution Reduction - PRES'23 (Thessaloniki, Greece) 国际会议组委会委员 |
2 |
2022年 |
河北省杰出青年基金获得者（每年全省20人左右） |
3 |
2022年起 |
国际期刊《Frontiers in Thermal Engineering》副主编 |
4 |
2022年 |
中科院一区SCI期刊《Energy》特刊领衔客座编辑 |
5 |
2021年 |
The 5th Sustainable Process Integration Laboratory Scientific Conference (Brno, Czech Republic) 国际会议组委会委员 |
6 |
2021年 |
中科院二区SCI期刊《Computers & Chemical Engineering》特刊客座编辑 |
7 |
2021年 |
SCI期刊《Energy Sources Part A-Recovery Utilization and Environmental Effects》编委 |
8 |
2020年 |
SCI期刊《Open Physics》编委，分管Nanophysics |
9 |
2020年 |
第一届“Asia Pacific Conference on Sustainable Development of Energy, Water and Environment Systems”国际会议科学顾问委员会（Scientific Advisory Board）委员 |
10 |
2020年 |
德国科隆“15th Conference on Sustainable Development of Energy, Water and Environment Systems”国际会议Energy storage分会主席（Chair） |
11 |
2020年 |
第四届“元光学者”（启航岗A） |
12 |
2020年 |
SCI期刊Open Physics特刊“Fundamental Physics of Thermal Transports and Energy Conversions”领衔客座编辑 |
13 |
2019年 |
克罗地亚杜布罗夫尼克 “14th Conference on Sustainable Development of Energy, Water and Environment Systems”国际会议“Various Sustainability topics”分会主席（Chair） |
14 |
2019年起 |
《辽宁石油化工大学学报》特邀编委 |
15 |
2018年 |
SCI期刊《Applied Thermal Engineering》年度“评审杰出贡献奖” |
16 |
2018年起 |
第一、二届“Latin American Conference on Sustainable Development of Energy, Water and Environment Systems”国际会议科学顾问委员会（Scientific Advisory Board）委员 |
17 |
2017年起 |
九三学社社员 |
18 |
2016年 |
葡萄牙里斯本 “11th Conference on Sustainable Development of Energy, Water and Environment Systems”国际会议“Heat and mass transfer modelling”分会联合主席（Co-chair） |
19 |
2016年起 |
第12-17届“Conference on Sustainable Development of Energy, Water and Environment Systems” 国际会议科学顾问委员会委员 |
20 |
2016年 |
SCI期刊《Energy Conversion and Management》2016年度“评审杰出贡献奖” |
21 |
2015年 |
“欧盟第七框架协议玛丽•居里学者奖”与克罗地亚教育部合作奖学金候选人（2015年度，全球40人入围） |
22 |
2015年 |
SCI期刊《Applied Thermal Engineering》年度“评审杰出贡献奖” |
23 |
2015年 |
西安交通大学“丝绸之路”国际杰出青年学者 |
24 |
2015年 |
优秀青年基金获得者 |
25 |
2015年 |
全国节能减排大赛优秀指导教师 |
26 |
2015年 |
天津市科普作家协会会员 |
27 |
2010年 |
美国机械工程师协会会员 |
5.联系方式
电话：022-60435781
邮箱：Jin.wang@www.ndytng.com
二、主要科研成果
1.近年来主持或参与的国家/省部级科研项目（不包括企业委托、国防军工等）
序号 |
项目名称 |
项目来源 |
项目时间 |
项目经费 |
承担角色 |
1 |
河北省杰出青年基金 |
河北省科技厅 |
2022-2024 |
50万 |
主持 |
2 |
磁性纳米流体在柔性微柱通道中的输运行为和主动强化传热机理研究 |
国家自然科学基金面上项目 |
2022-2025 |
58万 |
主持 |
3 |
基于视觉工效与信息反演的冬奥场馆光环境智能调控系统研究 |
河北省引导计划项目科技冬奥专项 |
2021-2022 |
40万 |
主持 |
4 |
微通道磁性纳米流体多物理场耦合传热机理研究 |
河北省自然科学基金面上项目 |
2021-2024 |
10万 |
主持 |
5 |
基于颗粒沉积模型与非平衡等离子体助燃的燃气轮机传热机理研究 |
科技部国际交流项目 |
2019-2021 |
11万 |
主持 |
6 |
微尺度颗粒沉积过程传热机理与预测模型研究 |
教育部重点实验室 |
2018-2020 |
8万 |
主持 |
7 |
基于沉积附着模型与热障涂层耦合传热的燃气透平综合冷却特性的机理研究 |
国家自然科学基金青年项目 |
2017-2019 |
20万 |
主持 |
8 |
基于热障涂层表面沉积的燃气透平气膜冷却特性的研究 |
河北省自然科学基金青年项目 |
2016-2018 |
4万 |
主持 |
9 |
基于无网格法的燃气透平叶片流固热耦合问题的研究 |
中国博士后科学基金面上项目 |
2016-2017 |
5万 |
主持 |
10 |
基于热障涂层失效的耦合传热气膜冷却特性的机理研究 |
优秀青年基金 |
2015-2017 |
20万 |
主持 |
11 |
机动车前照灯双灯同检检测仪 |
天津市人社局博士后创新择优资助项目 |
2013-2014 |
3万 |
主持 |
12 |
高温熔融盐自然对流换热机理及特性研究 |
河北省自然科学基金青年项目 |
2014-2016 |
3万 |
参与 |
13 |
高精度间断Galerkin方法及其在叶轮机械内部流动与传热模拟中的应用研究 |
国家自然科学基金面上项目 |
2013-2016 |
80万 |
参与 |
14 |
“燃气轮机的高性能热-功转换科学技术问题研究”子课题-燃气轮机热端部件冷却机理研究 |
国家“973计划”项目子课题 |
2007-2011 |
562万 |
参与 |
2. 奖励
（1）在2023年8月日本德岛举办的第七届节能减排传热传质前沿技术国际会议上，以通讯作者身份指导研究生发表关于槽式太阳能集热器磁性纳米流体光热转换效率的研究论文，获评最佳论文(会议评选3-4篇)；
（2）在2020年9月德国科隆举办的15届能源、水资源和环境系统可持续发展国际会议上，以通讯作者身份指导研究生发表关于纳米复合相变材料制备及应用的研究论文，该论文被评为国际会议最佳论文(每届会议评选3篇)；
（3）SCI期刊《Applied Thermal Engineering》2018和2015年度“评审杰出贡献奖”；SCI期刊《Energy Conversion and Management》2016年度“评审杰出贡献奖”；
（4）教育部高等学校能源与动力类专业教学指导委员会高级研修班重要成员，2014年；
（5）2015-2016、2013-2014学年课堂教学优秀奖，2014、2016年；
（6）全国大学生节能减排大赛三等奖优秀指导教师，2015年；
（7）第十四届iCAN国际创新创业大赛中国总决赛三等奖优秀指导教师，2020年；
（8）第十三届iCAN国际创新创业大赛中国总决赛三等奖优秀指导教师，2019年。
3.授权专利及软件著作权(不完全统计)
（1）发明专利，一种提高开槽气膜孔下游壁面气膜冷却效率的结构，第1
（2）发明专利，一种提高开槽孔下游横向气膜冷却效率的盖式结构，第1
（3）发明专利，一种提高组件外部冷却效果的上游结构，第1
（4）发明专利，一种新型气膜冷却开槽结构，第1
（5）发明专利，一种气膜冷却孔型结构，第1
（6）实用新型，提高开槽孔下游气膜冷却效率的盖式结构，第1
（7）实用新型，提高组件外部冷却效果的上游结构，第1
（8）实用新型，一种空调外机废热利用装置，第1
（9）实用新型，一种提高下游冷却效果的孔型结构，第1
（10）实用新型，一种改善冷却效果的新结构，第1
（11）实用新型，一种新型槽式太阳能热水器集热系统，第1
（12）实用新型，一种新型高效的采暖装置，第1
（13）实用新型，一种新型电加热装置，第1
（14）实用新型，一种新型电磁感应加热装置，第1
（15）软件著作权，带纠错功能的两种换热器耦合设计计算软件，第1
（16）软件著作权，同轴套管深井换热计算软件，第1
4.发表论文（截止到2023年）
发表国内外学术论文150余篇，其中SCI检索期刊论文80余篇，部分论文列表如下：
题 目 |
发表时间 |
刊物名称 |
Nanocatalysts in photocatalytic water splitting for green hydrogen generation: Challenges and opportunities |
2023 |
Journal of Cleaner Production |
Optimizing photothermal conversion efficiency in a parabolic trough direct absorption solar collector through ferrofluid and magnetic field synergy |
2023 |
Energy Conversion and Management |
Effect of drainage device on the transition of dripping and jetting modes |
2023 |
Physics of Fluids |
Multi-objective optimization of elliptical tube fin heat exchangers based on neural networks and genetic algorithm |
2023 |
Energy |
Enhanced film cooling and flow disturbance of an AGTB turbine cascade with plasma aerodynamic actuation at film-holes outlets |
2023 |
International Communications in Heat and Mass Transfer |
Simplified pyrolytic model of RP-3 fuel at high conversion rates and the effects of primary reaction on the regenerative cooling process |
2022 |
Aerospace Science and Technology |
Numerical investigation of pyrolysis and surface coking of hydrocarbon fuel in the regenerative cooling channel |
2022 |
Energy |
Investigation on thermal performance of nanofluids in a microchannel with fan-shaped cavities and oval pin fins |
2022 |
Energy |
Analysis of thermal efficiency of a corrugated double-tube heat exchanger with nanofluids |
2022 |
Energy |
Effects of pin fins and vortex generators on thermal performance in a microchannel with Al2O3 nanofluids |
2022 |
Energy |
Investigation on thermal performance of electric heaters with nanofluids |
2022 |
Fuel |
Effects of swirler blade angle and actuator applied voltage on combustion characteristics and cooling effectiveness |
2022 |
Fuel |
A review of self-cleaning technology to reduce dust and ice accumulation in hotovoltaic power generation using superhydrophobic coating |
2022 |
Renewable Energy |
Investigation on the thermal performance of flat-plate heat pipes with various working fluids under different inclination angles |
2022 |
Energy Reports |
Experimental study on photovoltaic/thermal system performance based on microencapsulated phase change material slurry |
2022 |
Energy Sources, Part A: Recovery, Utilization, and Environmental Effects |
Review on thermal performance of nanofluids with and without magnetic fields in heat exchange devices |
2022 |
Frontiers in Energy Research |
Enhanced film cooling and flow disturbance of an AGTB turbine cascade with plasma aerodynamic actuation at film-holes outlets |
2022 |
International Communications in Heat and Mass Transfer |
Simplified pyrolytic model of RP-3 fuel at high conversion rates and the effects of primary reaction on the regenerative cooling process |
2022 |
Aerospace Science and Technology |
Effects of plasma actuation and hole configuration on film cooling performance |
2022 |
Propulsion and Power Research |
Effects of Elastic Pillars on Fluid Flow and Heat Transfer Enhancement in a Microchannel |
2022 |
Thermal Science |
Effect of dielectric barrier discharge plasma on film cooling performance |
2022 |
Thermal Science |
Experimental study on heat transfer performance and flow visualisation in microchannels with micropillars |
2022 |
Thermal Science |
Improvement of cooling performance of hybrid nanofluids in a heated pipe applying an annular magnetic field |
2022 |
Journal of Thermal Analysis and Calorimetry |
Effects of salt and solidification treatment on the oil-contaminated soil: a case study in the coastal region of Tianjin, China |
2021 |
Journal of Cleaner Production |
Analyses of thermal performance and pressure drop in a plate heat exchanger filled with ferrofluids under a magnetic field |
2021 |
Fuel |
Numerical study of effusion cooling of a gas turbine combustor liner |
2021 |
Fuel |
Enhanced thermal management by introducing nanoparticle composite phase change materials for cooling multiple heat sources systems |
2021 |
Energy |
Effects of hole configuration on film cooling effectiveness and particle deposition on curved surfaces in gas turbines |
2021 |
Applied Thermal Engineering |
Effect of pyrolytic reaction of supercritical aviation kerosene RP-3 on heat and mass transfer in the near-wall region |
2021 |
Applied Thermal Engineering |
Numerical simulation of ammonia/methane/air combustion using reduced chemical kinetics models |
2021 |
International Journal of Hydrogen Energy |
Modelling the biomass updraft gasification process using the combination of a pyrolysis kinetic model and a thermodynamic equilibrium model |
2021 |
Energy Reports |
Investigation of heat transfer characteristics of Al2O3-water nanofluids in an electric heater |
2021 |
Heat Transfer Engineering |
Effect of various surfactants on stability and thermophysical properties of nanofluids |
2021 |
Journal of Thermal Analysis and Calorimetry |
Effects of particle size and mainstream inlet angle on deposition in a turbine cascade |
2021 |
Journal of Energy Resources Technology-Transactions of the ASME |
Numerical investigations of film cooling and particle impact on the blade leading edge |
2021 |
Energies |
Effect of buried depth on thermal performance of a vertical U-tube underground heat exchanger |
2021 |
Open Physics |
Numerical study on heat transfer and flow characteristics of nanofluids in a circular tube with trapezoid ribs |
2021 |
Open Physics |
Multi objective optimization of aspirating smoke detector sampling pipeline |
2021 |
Optimization and Engineering |
Effect and optimization of backward hole parameters on film cooling performance by Taguchi method |
2020 |
Energy Conversion and Management |
Performance analysis of a plate heat exchanger using various nanofluids |
2020 |
International Journal of Heat and Mass Transfer |
Performance of fuel-air combustion in a reheating furnace at different flowrate and inlet conditions |
2020 |
Energy |
Experimental investigation on heat transfer characteristics of various nanofluids in an indoor electric heater |
2020 |
Renewable Energy |
Experimental investigation of heat transfer performance of a heat pipe combined with thermal energy storage materials of CuO-paraffin nanocomposites |
2020 |
Solar Energy |
Heat transfer performance and friction factor of various nanofluids in a double-tube counter flow heat exchanger |
2020 |
Thermal Science |
Numerical study on characteristics of particle deposition efficiency on different walls of 90° square bend |
2020 |
Powder Technology |
Numerical investigation of particle deposition in film-cooled blade leading edge |
2020 |
Numerical Heat Transfer, Part A-Applications |
Investigation of heat transfer characteristics of Al2O3-water nanofluids in an electric heater |
2020 |
Heat Transfer Engineering |
Investigation on thermal-hydraulic performance prediction of a new parallel-flow shell and tube heat exchanger with different surrogate models |
2020 |
Open Physics |
Comparative study of the thermal performance of four different parallel flow shell and tube heat exchangers with different performance indicators |
2020 |
Open Physics |
Experimental investigation on convective heat transfer of ferrofluids inside a pipe under various magnet orientations |
2019 |
International Journal of Heat and Mass Transfer |
Analysis of a hybrid control scheme in the district heating system with distributed variable speed pumps |
2019 |
Sustainable Cities and Society |
Effect of hole configurations on film cooling performance |
2019 |
Numerical Heat Transfer, Part A-Applications |
Effect of phase change materials on heat dissipation of a multiple heat source system |
2019 |
Open Physics |
A novel evaluation method for particle deposition measurement |
2019 |
Open Physics |
Comparison and analysis of two thermal performance evaluation models for a public building |
2019 |
Open Physics |
Effects of gravity and variable thermal properties on nanofluid convective heat transfer using connected and unconnected walls |
2018 |
Energy Conversion and Management |
Medium-term heat load prediction for an existing residential building based on a wireless on-off control system |
2018 |
Energy |
Effect of blockage configuration on film cooling with and without mist injection |
2018 |
Energy |
Analysis of natural convection of Cu and TiO2 nanofluids inside non-conventional enclosures |
2018 |
Journal of Enhanced Heat Transfer |
A review of multiphase flow and deposition effects in film-cooled gas turbines |
2018 |
Thermal Science |
Effect of combined hole configuration on film cooling with and without mist injection |
2018 |
Thermal Science |
Effect of spherical blockage configurations on film cooling |
2018 |
Thermal Science |
Analysis of slab heating characteristics in a reheating furnace |
2017 |
Energy Conversion and Management |
Effect of an upstream bulge configuration on film cooling with and without mist injection |
2017 |
Journal of Environmental Management |
Numerical investigation of mist/air impingement cooling on rough-ribbed blade leading-edge surface |
2017 |
Journal of Environmental Management |
Numerical analysis of ammonia homogenization for selective catalytic reduction application |
2017 |
Journal of Environmental Management |
Two-phase flow simulation of mist film cooling with deposition for various boundary conditions |
2017 |
Numerical Heat Transfer, Part A-Applications |
Effects of surface deposition and droplet injection on film cooling |
2016 |
Energy Conversion and Management |
Effects of deposition locations on film cooling with and without a mist injection |
2016 |
Numerical Heat Transfer, Part A-Applications |
Effects of deposition height and width on film cooling |
2016 |
Numerical Heat Transfer, Part A-Applications |
Investigations of film cooling and its nonuniform distribution for the conjugate heat transfer passage with a compound inclined angle jet |
2016 |
Numerical Heat Transfer, Part A-Applications |
Conjugated heat transfer analysis of a film cooling passage with turbulator ribs |
2016 |
Heat Transfer Research |
Conjugated heat transfer analysis of a film cooling passage with different rib configurations |
2015 |
International Journal of Numerical Methods for Heat & Fluid Flow |
Study on the effect of punched holes on flow structure and heat transfer of the plain fin with multi-row delta winglets |
2015 |
Heat and Mass Transfer |
Influence of different rim widths and blowing ratios on film cooling characteristics for a blade tip |
2012 |
ASME Journal of Heat Transfer |